Rockwell Automation Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC, User Manual Download

Page: 43 / 78

Rockwell Automation Publication 6181X-UM002A-EN-P - October 2017

Set Up the UEFI Utility

Chapter 5

Firmware Update

You can update your system firmware from the Firmware Update menu.

Follow these steps to update the system firmware.

1. Click Firmware Update on the set-up screen.

The Firmware Update screen appears.

2. Click Browse to locate the firmware file.

3. Click Flash.

Parameter

Description

Browse

Click to navigate to the firmware file saved onto a media.

Firmware file location

Select or type the file name for the firmware file.

Flash

Click to start the BIOS programming.

IMPORTANT

The USB mass storage device that contains the firmware file must
be FAT, FAT16, or FAT32 formatted to be recognized.

See

http://www.rockwellautomation.com/compatibility/

to check

for revisions and to download firmware files.

Summary of Contents for Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,















































































Search results

Summary of Contents for Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Reviews:

Related manuals for Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Brands by name

Popular brands

Rockwell Automation Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,, User Manual

Search results

Summary of Contents for Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Reviews:

Related manuals for Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Brands by name

Popular brands