manualshive.com logo in svg

Rockwell Automation Allen-Bradley 6155F-NPWE, User Manual, Page: 49 / 56

Share
Download
Rockwell Automation Allen-Bradley 6155F-NPWE User Manual Download Page 49

Rockwell Automation Publication 6155R-UM002E-EN-P - February 2014

49

Appendix

 B

Upgrade to a New BIOS

BIOS Upgrade Procedure

Sometimes a new BIOS is released to enhance the performance of your computer 
or to correct a defect. In such cases, you can download BIOS upgrades at the 
Rockwell Automation Product Compatibility and Download Center (PCDC) 
website at

 http://www.rockwellautomation.com/support/pcdc

. CD and floppy disk 

drive upgrades are available.

Upgrade the BIOS from an 
External CD Drive

Follow these steps to upgrade the BIOS in your computer from an external CD 
drive.

1.

Attach the following external peripherals to your computer:

•

Display

•

Keyboard

•

CD drive

2.

Access the Rockwell Automation PCDC website at

http://www.rockwellautomation.com/support/pcdc

.

3.

Click the Get Downloads tab (A).

4.

Click the Find Product Downloads link (B).

5.

Use the Product Search criteria to find your specific computer model.

6.

Follow the instructions on the PCDC site to find your BIOS.

TIP

You must be registered with the Rockwell Automation PCDC website to 
download files.

You must accept a User Agreement before files can be downloaded.

A

B

Summary of Contents for Allen-Bradley 6155F-NPWE

























































Reviews:

No comments