40
Rockwell Automation Publication 48CR-UM001A-EN-P - November 2019
Chapter 7
Parameter Overview
Name
The module name
(1)
following standard RSLogix 5000® software IEC-1131
naming conventions. This field appears dimmed in Hard Run mode.
Description
The module description (up to 128 printable characters). If you exceed the
maximum length, the software ignores extra characters.
Module Definition
This section shows read-only module information. If you want to change this
information, click the Change button to access the Module Definition dialog
box.
(1) Once you apply the name (by clicking the OK or Apply button), you cannot change it.
Item
Description
Series
The series type of the module for the device catalog number.
Revision
The major and minor revision of the module.
Electronic Keying
The Electronic Keying of the module. The selectable modes are: Compatible Module (default),
Disable, Keying, and Exact Match.
Configured By
The code reader ownership options available for selection. You can select only one of the
following options:
• This Controller
• WebConnect and Logix Designer
• WebConnect
Input Format
The input assemblies available for selection. You can select only one of the three options,
which are:
• One Decode
• Four Decodes
• N Decodes