126
Rockwell Automation Publication 48CR-UM001A-EN-P - November 2019
Chapter 7
Parameter Overview
Quality Output
Figure 93 - AOP
Figure 94 - WebConnect
Separator (AOP)/Quality Output Separator (WebConnect)
The separator character separates quality output data from symbol data.
Enabled (AOP), Decodes/Trigger Status (WebConnect)
When this feature is enabled, the code reader enters a state where it processes
frames as configured until the end of a read cycle, with or without a successful
symbol decode. When the read cycle ends, the code reader outputs any decoded
symbol data along with the decodes per trigger count.
Setup Button
The Setup Button indicates how the button is programmed. When the button is
depressed, the device sequences through each button option. When the button is
released, the device executes the action that is programmed for that button
position. The status LEDs and the green LEDs also illuminate to signal the
current position. All button positions have the same configurable options.
Figure 95 - AOP
• Default: , <comma>
• Options: Any ASCII character.
• Default: Disabled
• Options: 0 = Disabled
1 = Enabled