118
Rockwell Automation Publication 48CR-UM001A-EN-P - November 2019
Chapter 7
Parameter Overview
– ON Only When Not in the Read Cycle
The target pattern is always ON except during the read cycle. If the
operational command overrides this setting, the target pattern always
remains on.
– ON Only When in the Read Cycle
The target pattern remains OFF except during the read cycle. If the
operational command overrides this setting, the target pattern always
remains on.
– Always ON
The target pattern is always ON.
Green Flash Duration
Provides visual verification that a good read has occurred. When a good read
occurs, the green LEDs illuminate and stay on for the time set in the Green Flash
Duration value.
LED Configuration
Useful as a visible indicator of read rates and symbol quality. Determines the
mode in which the status LEDs operate.
Figure 89 - AOP
Figure 90 - WebConnect
LED Mode
Useful as a visible indicator of read rates and symbol quality. Determines the
mode in which the status indicators operate.
• Default: 250 ms
• Options: 0…65,535 (in 10 ms increments)
• Default: Standard
• Options: 0 = Standard
1 = AIM Grade