manualshive.com logo in svg

Rockwell Automation Allen-Bradley 2711R-T10T, User Manual

Share
Download
Rockwell Automation Allen-Bradley 2711R-T10T User Manual Download Page 116

116

Rockwell Automation Publication  2711R-UM001H-EN-E - April 2021

Appendix B          Upgrade Firmware

Prepare the Storage Device

Follow these steps to prepare the storage device to transfer firmware files.

1. Insert the storage device into a USB host port or microSD card slot on 

your computer.

2. Open a web browser and access the PanelView 800 technical support 

website at 

https://www.rockwellautomation.com/en-us/products/

hardware/allen-bradley/human-machine-interface/graphic-terminals/
2711r-PanelView-800.html

.

3. Locate the new firmware file.
4. Observe the firmware revision information that is in the name of the 

firmware file and confirm that this is the new, desired firmware.

5. Download the firmware file to a folder on your computer, then open the 

file and unpack the contents of the firmware file to a microSD card or 
USB flash drive root directory.

Install the Firmware from the Storage Device

Follow these steps to transfer firmware files from a storage device.

1. Open the system information screen on the terminal to verify that the 

new firmware revision is correct. 

See 

View System Information on page 42

 for instructions on how to view 

the current firmware revision.

2. Insert the storage device into the USB host port or microSD card slot on 

your terminal.

3. When prompted to run the Autorun, press Yes or the F1 key. 

The splash screen appears and the progress bar indicates a firmware 
installation is in process.

When the firmware installation is complete and successful, the progress 
bar stops with the success code OK.

4. The terminal will automatically restart to complete the process.

IMPORTANT

Do not remove the microSD card or USB flash drive until upgrade - OK is 

displayed.

System Information

Main

Advanced

Firmware Version:

Boot Code Version:

Logic Board Version:

Terminal On Time:

Display On Time:

Battery Status:

Memory Usage (bytes)

Internal Used:

Internal Free:

Application Used:

Application Free:

3.011.000

2.020.000

4
102,330

102,330

Good

1,392,640

164,741,120

31,600,640

193,994,752

Summary of Contents for Allen-Bradley 2711R-T10T































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands