manualshive.com logo in svg

Rockwell Automation Allen-Bradley 1606-XLE240E, Reference Manual

Share
Download
Rockwell Automation Allen-Bradley 1606-XLE240E Reference Manual Download Page 21

Rockwell Automation Publication 1606-RM101A-EN-P - July 2020

21

Approvals

Other Standards

Approval Name

Approval Symbol

Notes

EC Declaration of Conformity 

The CE marking indicates conformance with the - EMC 
Directive, - Low Voltage Directive (LVD) and the - ATEX 
directive 

IEC 60950-1 2

nd 

Edition 

CB Scheme, Information Technology Equipment 

UL 508 

Listed for use as Industrial Control Equipment; U.S.A. 
(UL 508) and Canada (C22.2 No. 107-1-01); E-File: 
NMTR(7).E56639 

UL 60950-1 2

nd 

Edition 

Recognized for use as Information Technology 
Equipment, Level 5; U.S.A. (UL 60950-1) and Canada 
(C22.2 No. 60950-1); E-File: QQGQ(2,8). E168663 
Applicable for altitudes up to 2000 m (6562 ft). 

ANSI / ISA 12.12.01-2015 Class I Div 
2 (except 1606-XLE240EH) 

Recognized for use in Hazardous Location Class I Div 2 
T4 Groups A,B,C,D systems; U.S.A. (ANSI / ISA 12.12.01-
2015) and Canada (C22.2 No. 213-M1987) 

EN 60079-0, EN 60079-15 
ATEX (except 1606-XLE240EH) 

Approval for use in hazardous locations Zone 2 
Category 3G. Number of ATEX certificate: EPS 15 ATEX 1 
101 X The power supply must be built in, inside of an 
IP54 enclosure. 

IEC 60079-0, IEC 60079-15 
(except 1606-XLE240EH) 

Suitable for use in Class 1 Zone 2 Groups IIa, IIb and IIc 
locations. Number of IECEx certificate: IECEx EPS 
15.0079X 

Marine (except 1606-XLE240EH, 
1606-XLE240EP) 

GL (Germanischer Lloyd) classified 
Environmental category: C, EMC2 
Marine and offshore applications 

EAC TR Registration 

Registration for the Eurasian Customs Union market 
(Russia, Kazakhstan, Belarus) 

IND. CONT. EQ.

 

  

I 3G Ex nA nC IIC T4 Gc

IECEx

Standard Name

Standard Symbol

Notes

RoHS Directive

Directive 2011/65/EU of the European Parliament and 
the Council of June 8, 2011 on the restriction of the use 
of certain hazardous substances in electrical and 
electronic equipment.

REACH Directive

Directive 1907/2006/EU of the European Parliament 
and the Council of June 1, 2007 regarding the 
Registration, Evaluation, Authorization, and Restriction 
of Chemicals (REACH)

IEC/EN 61558-2-16 (Annex BB)

Safety Isolating Transformer

Safety Isolating Transformers corresponding to Part 2-
6 of the IEC/EN 61558

Summary of Contents for Allen-Bradley 1606-XLE240E







































Reviews:

No comments

Brands by name

Popular brands

Load more brands