Rockwell Automation Publication 1606-RM100A-EN-P - July 2020
21
Power Supply - 24V, 5 A, 120 W, Single-phase Input Reference Manual
Accessories
1606-XLA-XLE -Wall/Panel Mount Bracket
This bracket is used to mount the devices on a wall/panel without utilizing a
DIN rail. The bracket can be mounted without detaching the DIN rail brackets.
1606-XLSRED—Redundancy Module
The 1606-XLSRED is a dual redundancy module, which can be used to build 1+1
or N+1 redundant systems.
The device is equipped with two 10 A nominal input channels, which are
individually decoupled by utilizing diode technology. The output can be loaded
with a nominal 20 A continuous current.
The device does not require an additional auxiliary voltage and is self-powered
even if there is a short circuit across the output.
For a safe and vibration resistant wiring, the device is equipped with time
saving quick connect spring clamp terminals.
The unit is narrow and only requires 32 mm (1.26 in.) width on the DIN rail.
Figure 29 - Isometric Right View
Figure 30 - Isometric Rear View
Figure 31 - Isometric Left View
Figure 32 - Wall Mounting—Front View
Figure 33 - Wall Mounting—Hole Pattern
Figure 34 - Wall Mounting—Side View
