Rockwell Automation 9VT201-007HTNNN, User Manual, Page: 36 / 224

1-22 Installation/Wiring
Publication 9VT-UM001D-EN-P
I/O Terminal Block (Frames B…E)
Figure 1.16 Typical Frame B…E I/O Terminal Block Location (B Frame Shown)
Table 1.H I/O Terminal Block Specifications
Table 1.I Wire Routing Recommendations
Figure 1.17 I/O Terminal Positions (Frames B…E)
No. Name Description
Wire Size Range
(1)
Torque
Maximum Minimum Maximum Recommended
➊
I/O Terminal
Block Signal & control
connections 1.5 mm
2
(16 AWG)
0.05 mm
2
(30 AWG)
0.55 N-m
(4.9 lb.-in.) 0.5 N-m
(4.4 lb.-in.)
(1)
Maximum / minimum that the terminal block will accept - these are not recommendations.
No. Description
➋
Suggested entry for communication wiring.
➌
Suggested entry for I/O and control wiring.
14 26
13 1