Rockwell Automation 6181P User Manual Download

Page: 59 / 124

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014

UEFI Set-up Utility

Chapter 5

Firmware Update

You can update your system firmware from the Firmware Update menu.

Follow these steps to update the system firmware.

Click the Firmware Update menu.

The Firmware Update screen appears.

Click Browse to locate the firmware file.

Click Update.

Parameter

Description

Browse

Click to navigate to the firmware file saved onto a media.

Firmware file location

Select or type the filename for the firmware file.

Update

Click to initialize the update process.

Exit

Click to exit the set-up utility.

IMPORTANT

The USB mass storage device that contains the firmware file must be
FAT, FAT16, or FAT32 formatted to be recognized.

See

http://www.rockwellautomation.com/compatibility/

to check for

revisions and to download firmware files.

Summary of Contents for 6181P





























































































































Search results

Summary of Contents for 6181P

Reviews:

Related manuals for 6181P

Brands by name

Popular brands

Rockwell Automation 6181P, User Manual

Search results

Summary of Contents for 6181P

Reviews:

Related manuals for 6181P

Brands by name

Popular brands