Publication 440R-RN001A-EN-P - April 2009
6
Guardmaster MSR57P Speed Monitoring Safety Relay
Confirm the Update
Follow these steps to confirm that the update was successful.
1.
Select the MSR57P relay and click the information icon
to
open the relay Properties dialog box.
2.
Click the Details tab and verify that these revisions are shown.
3.
Close the MSR57P dialog box.
Download Your Saved
Configuration File
Follow these steps to reload your configuration to the relay.
1.
In the DriveExplorer tree view, expand the MSR57P relay.
2.
From the Actions menu, choose Download Saved File.
3.
Click Yes to acknowledge that setup values may change.
4.
Browse to the configuration file you saved before performing
the firmware update (*.csf file).
5.
Select your file and click Open.
6.
Expand the Parameters and choose the Security group.
7.
Compare the value of [P10] Signature ID to the value you
recorded before the upgrade.
The two values should be the same.
8.
Place the relay in Run mode by setting the P6 [Operating Mode]
parameter to 1.
File
Revision
Checksum
Application Program
1.005.01
0xC081
Boot Program
1.005.01
0x7104
Core Boot A
1.003.01
0xB049
Core Executive A
1.005.01
0xE2E8
Core Boot B
1.003.01
0xE9A3
Core Executive B
1.005.01
0xF578
IMPORTANT
.
