manualshive.com logo in svg

Rockwell Automation 2711PC- T6C20D, User Manual

Share
Download
Rockwell Automation 2711PC- T6C20D User Manual Download Page 51

Publication 2711PC-UM001A-EN-P - March 2009

51

Configuring the Terminal        

Chapter

 

4

Adjust the Display Contrast

You can view or modify the display contrast for 400 and 600 grayscale 
terminals. Displays are shipped with the contrast level set at 50%, 
which is the optimum setting.

1.

Select Terminal Settings>Display>Display Contrast.

2.

Press the up an down cursor buttons to adjust the contrast.

The current contrast level is shown as a percentage. The change 
is not permanent until you press OK.

3.

Press OK when done.

Adjust the Display Intensity

You can view or modify the intensity of the terminal backlight. You 
can use the default intensity of 100% or you can set the intensity for 
runtime operations. 

1.

Select Terminal Settings>Display>Display Intensity.

2.

Press the Startup Intensity button to switch between the Default 
intensity and the Runtime intensity. 

•

If you choose Runtime, the startup screens will use the 
runtime intensity. 

•

If you choose Default, the startup screens will use the default 
setting of 100%

3.

Increase or decrease the intensity for runtime operations, by 
pressing the up or down arrow keys. 

Intensity changes are not permanent until you press OK.

4.

Press OK when done.

Summary of Contents for 2711PC- T6C20D





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands