manualshive.com logo in svg

Rockwell Automation 2711PC- T6C20D, User Manual

Share
Download
Rockwell Automation 2711PC- T6C20D User Manual Download Page 47

Publication 2711PC-UM001A-EN-P - March 2009

47

Configuring the Terminal        

Chapter

 

4

Managing Files on the 
Terminal

The terminal provides operations for managing files that are stored on 
the terminal.

•

Delete application .MER files, font files, or log files that reside in 
a storage location on the terminal. 

•

Copy application .MER files or font files from one storage 
location to another.

Delete an Application File or a Font File

The procedure for deleting an application file or a font file from the 
terminal is the same except for the type of file you are deleting.

1.

Select Terminal Settings>File Management>Delete Files>Delete 
Applications or Delete Fonts.

2.

Press the Source button to choose the storage location of the 
application or font file you want to delete.

•

Internal Storage - the internal CompactFlash in the terminal.

•

External Storage 1 - the external CompactFlash card loaded in 
the card slot of the terminal.

•

External Storage 2 - for future use.

3.

Select a file from the list.

4.

Press the Delete button. 

5.

Select Yes or No when asked if you want to delete the selected 
application or font file from the storage location.

Summary of Contents for 2711PC- T6C20D





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands