manualshive.com logo in svg

Rockwell Automation 20A-DG01, User Manual, Page: 24 / 24

Share
Download
Rockwell Automation 20A-DG01 User Manual Download Page 24

Publication PFLEX-UM003D-EN-P - June 2021 | Supersedes Publication PFLEX-UM003C-EN-P - October 2020

Copyright © 2021 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

Allen-Bradley, DriveGuard, expanding human possibility, Minotaur, PowerFlex, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Automation Support

Use these resources to access support information.

Documentation Feedback

Your comments help us serve your documentation needs better. If you have any suggestions on how to 

improve our content, complete the form at

rok.auto/docfeedback

.

Waste Electrical and Electronic Equipment (WEEE)

Rockwell Automation maintains current product environmental compliance information on its website at 

rok.auto/pec

. Your 

comments help us serve your documentation needs better. 

If you have any suggestions on how to improve our content, complete the form at

rok.auto/docfeedback

.

For technical support, visit 

rok.auto/support

.

Rockwell Otomasyon Ticaret A.

Ş

. Kar Plaza 

İş

 Merkezi E Blok Kat:6 34752, 

İ

çerenköy, 

İ

stanbul, Tel: +90 (216) 5698400 EEE Yönetmeli

ğ

ine Uygundur

Technical Support Center

Find help with how-to videos, FAQs, chat, user forums, 

and product notification updates.

rok.auto/support

Knowledgebase

Access Knowledgebase articles.

rok.auto/knowledgebase

Local Technical Support 

Phone Numbers

Locate the telephone number for your country.

rok.auto/phonesupport

Literature Library

Find installation instructions, manuals, brochures, and 

technical data publications.

rok.auto/literature

Product Compatibility and 

Download Center (PCDC)

Download firmware, associated files (such as AOP, EDS, 

and DTM), and access product

release notes.

rok.auto/pcdc

At the end of life, this equipment should be collected separately from any unsorted municipal 

waste.

*PN-631486*

PN-631486

Summary of Contents for 20A-DG01

























Reviews:

No comments