Rockwell Automation 1756-L71S Quick Start Manual Download Page 51

Page: 51 / 200

Rockwell Automation Publication IASIMP-QS005H-EN-P - April 2016

GuardLogix® Controllers Logic Integration

Chapter 3

Configure Your Guard I/O Modules

Follow these steps to configure your Guard I/O modules.

1. From the I/O Configuration within GuardIO_Module_Configuration_V1

.ACD, browse to the Ethernet or

DeviceNet communication module with the appropriate safety rating for your application.

2. Referring to the Safety Module Configuration worksheets you created in

Chapter 2

, choose your Guard I/O

module to match the catalog number and safety category.

This example shows a 1791ES-IB16 in a Cat. 4 Ethernet application.

3. Right-click the module and choose Copy.

IMPORTANT

The 1756 GuardLogix controller and 1756 communication modules support both Guard I/O EtherNet/IP and DeviceNet
modules.

The 1768 Compact GuardLogix controller and 1768-ENBT communication module support Guard I/O EtherNet/IP safety
modules. The 1769-SDN communication module does not support Guard I/O DeviceNet safety modules. However, the



1769-SDN can be used with the 1768 Compact GuardLogix controller for standard DeviceNet communication.

Summary of Contents for 1756-L71S









































































































































































































Search results

Summary of Contents for 1756-L71S

Reviews:

Rockwell Automation 1756-L71S, Quick Start Manual, Page: 51 / 200

Search results

Summary of Contents for 1756-L71S

Reviews: