18
Rockwell Automation Publication 1606-RM028A-EN-P - September 2021
Approximate Dimensions
and Weight
EC Declaration of Conformity
The CE marking indicates conformance with the following:
– EMC Directive
– Low Voltage Directive (LVD)
– RoHS directive
REACH Directive
Manufacturer's Statement
EU-Directive regarding the Registration, Evaluation,
Authorization, and Restriction of Chemicals
EAC TR Registration
Registration for the Eurasian Customs Union market (Russia,
Kazakhstan, Belarus)
(1) Product certification information (including Certificates and Declarations of Conformity) can be found at
.
Names
Symbols
Notes
(1)
Attributes
Values and Descriptions
Width
125 mm (4.92 in.)
Height
124 mm (4.88 in.)
Depth
127 mm (0.5 in.)
(1)
(1) Add the DIN rail height to the unit depth to calculate the total required installation depth.
Weight
1900 g (4.2 lb)
DIN rail
Use 35 mm (1.38 in.) DIN rails according to EN 60715 or EN 50022 with a height of
7.5 mm (0.30 in.) or 15 mm (0.59 in.).
Housing material
Aluminum body, steel cover
Installation clearances
Top: 40 mm (1.57 in.)
Bottom: 20 mm (0.79 in.)
Left/right: 5 mm (0.2 in.)
(2)
(2) Increase the 5 mm (0.2 in.) to 15 mm (0.59 in.) in case the adjacent device is a heat source. When the
device is permanently loaded with less than 50%, the 5 mm (0.2 in.) can be reduced to zero.
Figure 30 - Front View [mm (in.)]
Figure 31 - Side View [mm (in.)]
40 (1.57) 19.1 (0.75)
40.5 (1.54)
75.4 (2.97)
Width 125 (4.92)
DIN Rail Depth
Width 127 (5.0)
Height 124 (4.88)
