R6RT Model Specifications
Your RocknRoller Multi-Cart shipping box should
contain a frame and the following parts:
Recommended Tools For Assembly
Length (Compact)
28”
4 x
½” flat washers
Length (Extended)
42.5”
4 x
½” lock nuts
Channel Lock Pliers
(not included)
Width (Frame Bed)
12.5”
1 x 1” (25 mm) square plastic endplug (spare)
Width (Rear Casters)
18”
1 x
¾” (20 mm) square plastic endplug (spare)
Height (Folded)
9.5”
4 x
4”x 1” (100 mm x 25 mm) stem casters
Height (Unfolded)
33.25”
1 x
Flat Wrench
Front Casters
4” x 1”
1 x
Assembly/instruction sheet
Rear Casters
8” x 2.5”
2 x
570 mm Non-skid Tape (optional - place where preferred)
Weight
22 lbs.
Load Capacity
500 lbs.
Installing Swivel Casters
Attach swivel casters as shown. While tightening lock nuts, grip bearing cap with channel lock pliers or pipe wrench to prevent
threaded stem from turning. Tighten lock nuts firmly, but not excessively tight. Check lock nut tightness on caster stems periodically.
