R
EINFORCEMENT
C
APACITOR
RP7400/7402/7405/
7410/7430/7435
Installation & Application Manual
®
t h e c o n n e c t i n g
Page 1: ...REINFORCEMENT CAPACITOR RP7400 7402 7405 7410 7430 7435 Installation Application Manual the connecting ...
Page 2: ...mend using the same gauge wire as that of the power connection to the amplifier Ground the capacitor to the nearest chassis ground using the same gauge wire as that used for the power connection It is strongly recommended the capacitor be fused at the battery The fuse value should be the same as that of the power connection to the amplifier This fuse should be installed 18 from the battery See ill...
Page 3: ...stored for later use SPECIFICATIONS Rating 1 000 000mF 1 farad 7410 7400 250 000mf 7402 500 000mf 7405 VDC 20 Max 24V surge 16V 20V surge on 7400 Tolerance 10 50 Dimensions 3 x 8 625 7410 7400 3 x 6 5 7405 3 x 3 5 7402 all status cap add 3 4 for height ESR 0 00198Ω 120Hz 25c Terminals 1 4 28 thread 24 karat gold plated Tools 3 16 Allen wrench WARRANTY INFORMATION Theses capacitors are nearly indes...
Page 4: ... Terminal Connect to chassis ground Turn on Wire Attach amp turn on wire here to turn electronics on and off The cap is al ways charged Sensitivity Adjustment To set properly turn engine on and set system volume level to anaveragelisteninglevel 90dB With a small screwdriver turn counterclockwise until at least 3 bars are not lit Then turn it clockwise until all bars are lit again Be sure to stop a...
