Roche OMNI C, Instructions For Use Manual

Page: 85 / 152

5 Quality control
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
5-7
The following screen appears (for example):
Fig. 7
Select the material/level combination from the list (this list contains all material/level com-
binations that were created under "Settings - QC Material - AutoQC Material" or "Settings
- QC Material - Set ranges").
Confirm the selection with .
Enter the start time.
Any number of materials and times can be selected.
Press .
the attributes of the time entries can be edited.
Copying a time entry
Select a day of the week and a time entry and press – the selected time entry of this
weekday will be copied.
Select another day of the week and press – the copied time entry will be entered for
the new weekday.
These entries can be transferred to as many other weekdays as required.