Roche OMNI C, Instructions For Use Manual

Page: 74 / 152

4 Measurement
4-10
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
Use the "line up / line down" buttons to select the entry that you would like to modify or
use your finger to select the appropriate line directly. By pressing these buttons, you can
complete the following steps:
4.2.4 Results display / measurement report
After the measurement is complete and all parameters have been entered, the Roche
OMNI C displays the results on a standardized or user-specific form on the screen before
printing the results.
Use the menu selection "Setup - Displays & reports - Measuring data - Result screen" to
create a user-specific results display (see Reference Manual, chapter "Operating modes -
Setup").
Press the and buttons to select a predefined form.
This remains the standard until a new form is selected.
You can create a user-specific measurement report by selecting
and
Display & reports > Measuring data > Measurement report
(see Reference Manual, chapter "Operating Modes - Setup").
Press the and buttons to select a predefined report.
This remains the standard until a new report is selected.
Fig. 9
Input data
Edit the underlying entry
Go to additional views
Start a printout