Roche OMNI C, Instructions For Use Manual

Page: 72 / 152

4 Measurement
4-8
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
4.2.2 Capillary mode
• Open the flap to the labelled capillary position (completely open position).
The aspiration process is started.
Open the flap slowly to avoid splattering small drops of liquid that are on the
needle tip.
Fig. 5
• Insert the capillaries or the microsampler into the fill port.
The end of the capillary must be open, otherwise the aspiration process is blocked
and the sample is rejected.
The clot catcher cannot be connected in "Capillary mode". The capillary with
attached clot catcher must be held in position!
Never inject the sample into the instrument!
Danger of infection!
Fig. 6
•
The sample is aspirated automatically into the analyzer.