Roche OMNI C, Instructions For Use Manual

Page: 50 / 152

2 Specifications
2-4
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
2.6 Calibrations
1)
incl. calibration
Calibrations Time intervals
Length
(typical)
[min]
Sys cal every 24 hours (alternatively 8, 12 or 24 hours) <15
1P cal every 30 minutes (alternatively 1 hour) <2
2P cal every 12 hours (alternatively 4, 6, 8 or 12 hours) <7
Warm-up phase ....
when turning ON
1) <25
Warm-up phase .... power failure < 1 minute <2
Electrode exchange as needed <27