Roche OMNI C, Instructions For Use Manual

Page: 140 / 152

8 Operating modes
8-6
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
Description of the buttons and their function
The buttons described here are used only in the "Database" operating mode.
mark The completed line is marked, the cursor moves to the next line.
search This function enables the search according to search criteria in
ascending or descending order.
sort This function enables sorting of records.
Sort criteria : Date / Time (Only for measurement,
calibration, QC, and instrument data)
Up arrow - the records are arranged in ascending order
(oldest date is at the top).
Down arrow - the records are arranged in descending order
(youngest date is at the top).
Sort criteria : OpID (Only for measurement data)
Up arrow - the records are arranged in ascending order.
Down arrow - the records are arranged in descending order.
Sort criteria : patient ID (Only for measurement data)
Up arrow - the records are arranged in ascending order.
Down arrow - the records are arranged in descending order.
Sort criteria : last name (Only for measurement data)
The records are arranged alphabetically according
to the patients' names.
Up arrow - the records are arranged alphabetically in ascen-
ding order (for example, from top to bottom -
Z->A)
Down arrow - the records are arranged alphabetically in descen-
ding order (for example, from top to bottom -
A->Z)
QC statistics Only for QC data:
The marked ranged is depicted as a Levey Jennings chart.
Only for patient data:
The measurement data associated with the selected entry is
shown.