Roche MagNA Pure Compact Instrument, Operator'S Manual

Page: 55 / 130

General Overview 19
A
A
To specify the default laboratory name that will be mentioned with all generated
data, touch the Laboratory Name field, then use the pop-up virtual keyboard to
type the laboratory name into the field.
Alarm Settings
To specify the types of alarm that the instrument software should give, as well as
the loudness of each alarm, touch appropriate buttons on the "Acoustic Signals“
panel.
Note: You can choose to sound an alarm each time an error message is displayed
(Error), each time a button has been touched on the virtual keyboard (Keyboard),
and each time the purification run has ended (End of the run). If you don’t want
one of these alarms, just select
for that particular alarm. For each alarm you
want, choose whether the alarm sound should be given at low, medium or high
volume.
Select Back to return to the Settings Menu without modification.
Select the Operator List button from the Setup menu.
To enter a new operator type a new name into the entry field below the Operator
List and select the Add button.
Note: Only an administrator can define a new user. The administrator is asked for
his admin password when this button is used. If no administrator should be
defined, set the first time the Return key.
Action Software Screen
8d
8e
9
10
Installation of the Instrument
Setup
MagNA Pure Compact Manual.book Seite 19 Dienstag, 28. Februar 2006 4:16 16