Roche MagNA Pure Compact Instrument, Operator'S Manual

Page: 54 / 130

MagNA Pure Compact Operator’s Manual - Version 1.3 18
A
A
Basic Settings
Program the actual time and date by pressing the buttons next to the time
and date displays. A pop up window opens to allow you to set the correct values.
Touch the Up and Down buttons (to the right of each number) to change the
values for hours and minutes (see figure). The Up button increases values
by one unit, the Down button decreases values by one unit. Touch the OK button
to confirm the changes and return to the SETTINGS Screen. Touch the Cancel
button to return to the Settings Screen without changing any settings.
Note: The hour setting uses a 24-hour clock, where 11:00 PM is hour 23, and
midnight is hour 0. The hour and minute values can be set independently; that is,
you can change from minute 59 to minute 0 (or vice versa) without causing the
hour setting to change.
Touch the Up and Down buttons (to the right of each number) to change the
values for year, month and day (see figure). The Up button increases values;
the Down button decreases values. Touch the OK button to confirm the changes
and return to the SETTINGS Screen. Touch the Cancel button to return to the
SETTINGS Screen without changing any settings.
Note: These values can be set independently. You can change from December to
January (or vice versa), without causing the year to change. You can change from
day 30 (or 31) to day 1 (or vice versa) without causing the month to change.
To specify the default folder where all generated data will be saved, touch the
Folder field, then use the pop-up virtual keyboard to type the name of the folder
into the field .
Action Software Screen
8
8a
8b
8c
Installation of the Instrument
Setup
MagNA Pure Compact Manual.book Seite 18 Dienstag, 28. Februar 2006 4:16 16