Roche CoaguChek XS Pro, Operator'S Manual

Page: 148 / 156

B
• Appendix
148
Using the OTS function A request for an Observed Test Sequence comes from the
DMS. The presence of the icon on the Patient Test
button indicates a pending OTS request.
Observer:
1 Touch
Patient Test
.
In the
Pat. Test -OTS
menu, the Patient Test button is
grayed out (disabled) until the observer has logged in.
2 Touch Observer Login .
3 Wait until the observer list is displayed.
4 Select your observer ID by touching the corre-
sponding button, or scan your operator ID (which is
also your observer ID in this case).
5 Enter the (optional) password.
6 After you enter your password, touch to log in.
The Pat. Test - OTS menu is displayed again. The
Patient Test
button is now active.
7 Hand the meter to the operator who can now per-
form the patient test under supervision.
Observer 09:15 am
04/19/2012
Ann Casey
Alan Smithee
Scan
Pat. Test - OTS 09:15 am
04/19/2012
Observer Login
Patient Test
OTS enabled
Main Menu 09:15 am
04/19/2012
Control Test
Review Results
Setup
Patient Test
Logout
Pat. Test - OTS 09:15 am
04/19/2012
Observer Login
Patient Test
OTS enabled
Only operators with OTS observer rights are listed in the
Observer Login list.