Roche CoaguChek Vantus, User Manual

Page: 95 / 324

95
Beeper Volume
If the beeper is activated, the meter always
beeps when an action is taken, for example a
test strip is inserted or a sufficient sample has
been applied.
The beeper volume can be set or deactivated.
However, in case of an error the meter will
always beep for safety reasons, even if you
have set the beeper function to Off . To set the
beeper volume:
1 Select Beeper Volume and press the
Enter button to open the corresponding
menu.
The currently set volume is indicated by a
green dot on the right.
2 Use the up/down arrows button to
select the desired volume.
3 Press the Enter button to confirm the
selection, which is now indicated by the
green dot.
4 Press the Enter button again to save the
selected volume.
Settings
Beeper Volume
Set Targets
Result Format
Display Brightness
Time & Date
Button Click
Beeper Volume
Medium
High
Off
Low
Save
Reminders and Meter Settings
CoaguChek Vantus User’s Manual, version 1.0