Roche CoaguChek Pro II, Operator'S Manual

Page: 107 / 206

107
CoaguChek
®
Pro II · Operator’s Manual
3 Slide the new code chip into the code chip slot (as
shown) until you feel it snap into place.
If the code chip is missing or incorrectly inserted, a
corresponding error message appears in the
display. See Chapter 9.1 Status / Error messages
(169)
r
To power on the meter
1 Place the meter on a level, vibration‑free surface,
or hold it in your hand so it is roughly horizontal.
2 Power the meter on by pressing .
You can also power on the meter directly by
inserting a test strip or connecting the power
adapter.
• The next steps depend on whether you work
with the function Operator ID set to inactive or
active. See 7.1 Data handling (147)
3 If the function Operator ID is inactive, wait until the
Main Menu is displayed.
4 Testing a Blood Sample
• 4