Roche CoaguCheck Pro II, Operator'S Manual

Page: 70 / 188

70
3.4 ID Setup
Use the ID Setup menu to enter settings for user man-
agement and patient management. These settings are
optional and set to Off/Inactive by default; the meter can
be operated without these settings.
There are three types of identification used with the
meter:
■
System Administrator: The Admin. (Administra-
tor) has special rights to enter certain meter set-
tings and is the only one who can enter and change
these settings. It is not necessary for
Admin
. identi-
fication to be activated to use the CoaguChek Pro II
meter. However, it might be desired or necessary,
depending on the regulatory environment and the
site of use.
■
Operator: The Operator ID is assigned to persons
who use the meter to run tests. If you want to use
Operator IDs , you have several options:
– You may use
Operator IDs
to restrict the use of the
meter to qualified personnel or a predefined group
of users. In this case an operator list created exter-
nally must be transferred to the meter, enabling you
to select an
Operator ID
when logging in. For more
details see “Data handling”, starting on page 139.
– You may use Operator IDs for informational pur-
poses only, in order to assign stored measurement
results to the users who performed the test. In this
case Operator IDs may be entered directly on the
meter (by keypad or scanner), with or without an
operator list being available.