Roche Cedex Bio, Operator'S Manual

Page: 409 / 496

Roche Diagnostics
Operator’s Manual · Version 3.1 E-19
Cedex Bio System 13 ISE operation
Daily operation
The following sections describe the specific ISE operation tasks.
Safety information
WARNING
Injury through reagents and other working solutions
Direct contact with reagents, cleaning solutions, or other working solutions may cause
personal injury.
When handling reagents, exercise the precautions required for handling laboratory
reagents, observe the cautions given in the package insert, and observe the information
given in the Safety Data Sheets available for Roche Diagnostics reagents and cleaning
solutions.
Infection by biohazardous materials
Contact with samples containing material of human origin may result in infection. All mate-
rials and mechanical components associated with samples of human origin are potentially
biohazardous.
o
Be sure to wear protective equipment. Take extra care when working with protective
gloves; these can easily be pierced or cut, which can lead to infection.
o
If any biohazardous material is spilled, wipe it up immediately and apply disinfectant.
o
If waste solution contacts your skin, wash it off immediately with water and apply a dis-
infectant. Consult a physician.
Personal injury or damage to the analyzer due to contact with instrument
mechanism
Do not touch any parts of the instrument other than those specified. During operation and
maintenance of the instrument, proceed according to the instructions.
Keep all covers closed, operate them as instructed on the screen.
Incorrect results or damage to the analyzer due to wrong operation
Operators are required to have a profound knowledge of relevant guidelines and norms as
well as the information and procedures contained in the Operator’s Manual.
o
Do not carry out operation and maintenance unless you have been trained by Roche
Diagnostics.
o
Start all maintenance actions on the screen. Do not perform maintenance actions with-
out the assistance of the user interface.
o
Carefully follow the procedures specified in the Operator’s Manual for the operation
and maintenance of the system.
o
Leave maintenance that is not described in the Operator’s Manual to trained Roche
support representative personnel.
o
Follow standard laboratory practices, especially when working with biohazard material.