Roche ACCU-CHEK Inform II, Operator'S Manual

Page: 45 / 212

Patient Glucose Testing •
3
45
Entering the patient ID manually Use the displayed keypad to enter the patient ID. You can
select characters in the same manner as when entering
an operator ID.
1 Touch the letters or numbers to enter the ID.
2 Use the following buttons to toggle between ranges
of characters:
– for letters A-O
– for letters P-Z
– for numbers 0-9
3 Touch to backspace and delete a character
entered incorrectly. Touch to delete the whole
entry. Touch to enter a space.
4 Touch to confirm, or touch to cancel this
procedure and return to the
Main Menu
.
If the patient ID you have entered is not valid (or the
patient is not found in the downloaded list), an error mes-
sage is displayed. Confirming the message allows you to
enter the ID again.
Selecting the patient ID from a
list Choose the patient ID from a list
1
, if a list has been down-
loaded to the meter (from the data management system).
1 Touch or to scroll up or down in the list.
If one of the buttons is hidden, you have reached the top
or bottom of the list.
2 Touch the desired entry to select a patient, or touch
to cancel this procedure and return to the
Main Menu .
A B C D E
F G H I J
K L M N O
P-Z 123
Patient ID 12:48 pm
09/18/13
A-O
P-Z
123
1. Depending on the meter configuration, this feature may
be disabled.
Patient ID
Keyboard
ID: 2222222222
Name: Jane Doe
ID: 3333333333
Name: John Doe
ID: 4444444444
Name: Jenny Doe
ID: 5555555555
Name: James Doe
12:48 pm
09/18/13