ROCAM INSTRUCTIONS
ASSEMBLY, INSTALLATION, USE AND MAINTENANCE.
Rev. 01/2016
Rocam Losi s.r.l. declines every responsibility on any print and/or transcription mistake contained in this booklet
Rocam Losi s.r.l. can change feautures and datas of this booklet with the proposal of keeping on increase the quality of its products.
Anytime and without notice, this booklet can’t be considered as contract with third parties.
2
1. Instruction warnings
User has to hold the hole instructions. User must store up this document in case of
use. Producer do not assume any responsibility for damages incurred due to the failure of
improper use of this manual.
All measures in this manual are in mm.
2. Safety and Right Use Warning
The Rocam Losi products meet the latest technological evolutions and
current safety guidelines.
Trolley line
HIRA
, object of this booklet, is projected to be in compliance with
directives and field laws, in order to guarantee a safe and reliable product.
Any other use will be considered inapposit to the original destination.
Producer do not assume any responsibility for damages caused by an
improper use. Responsibility lies only on user.
A proper use also includes compliance with the instructions for use and installation and
any additional documentation as well as the conditions of inspection and maintenance.
3. Warranty
We thank you for purchasing a Rocam Losi product, design and produced for a
professional environment. Due to commercial and construction requirements, the
manufacturer reserves the right to make changes in order to enhance the quality and use
of product. Rocam Losi s.r.l., in compliance with European Community legislation, grants
its products for 12 months from the delivery date. This warranty does not include electrical
parts, labor and all replacements related to an improper use of the good. Any manipulation
carried out automatically excludes the liability of the manufacturer. The products or parts to
be replaced or repaired for unequivocal defects in workmanship and materials used must
be in a “free port” at the offices of the producer, who after a careful inspection, will repair or
replace them. The repairs are carried out exclusively at the headquarters of the
manufacturer, and none cost incurred by the customer for repairs will be refunded by the
manufacturer unless expressly agreed.
4. Installation and assembly
This article is packed and delivered unassembled. Its assembly must
be executed by qualified staff. The manufacturer declines every responsibility
of damage of someone or something caused by the failure to comply with the
instructions of this manual.
Do not make any structural change to the trolley.
The elements composing the trolley (plastic, polyurethane foam, bubbole wrap, Styrofoam,
cardboard and so on) must be kept away from children as potential sources of danger and
must be collected and disposed off separately in accordance with local regulations.