background image

Robustel GoRugged M1000 Pro User Guide 

 

 
RT_M1000 Pro_UG_v01.01 

27.12.2011 

1 / 59 

Confidential 

About This Document 

This document describes the hardware and software of the 

Robustel M1000 Pro Serial to GPRS/EDGE Gateway

 
 
 

Copyright©  

Guangzhou Robustel Technologies Co., Limited

 

All Rights Reserved.

 

 
 
 

Trademarks and Permissions 

Robustel are trademark of Guangzhou Robustel Technologies Co. Limited. 
All other trademarks and trade names mentioned in this document are the property of their respective holders. 
 
 
 

Disclaimer 

No part of this document may be reproduced in any form without the written permission of the copyright owner. 
The contents of this document are subject to revision without notice due to continued progress in methodology, 
design and manufacturing. Robustel shall have no liability for any error or damage of any kind resulting from the use 
of this document. 
 
 
 

Technical Support Contact Information 

Tel:            +86-2023354618 
Fax:            +86-2032016426 
E-mail:       

[email protected]

 

Web:         

www.robustel.com

 

 

Summary of Contents for GoRugged M1000 Pro































































Reviews: