ROBOTIQ RWC-CAM-001 Instruction Manual Download Page 15

Page: 15 / 134

3. Installation

The following subsections will guide you through the installation and general setup of your Robotiq Wrist Camera.

Warning

Before installing:

Read and understand the safety instructions related to the Vision System.

Verify your package according to the scope of delivery and your order.

Make sure to have the required parts, equipment and tools listed in Scope of delivery.

Warning

When installing:

Meet the recommended environmental conditions.

Do not operate the Vision System, or even turn on the power supply, before the device is firmly anchored and the machine
area is cleared. Make sure that the air supply is secured.

3.1. Scope of Delivery

3.1.1. RWC-UR-KIT

Includes the Wrist Camera and required hardware.

RobotiqWrist Camera with 10-m high flex cable

Universal Robots pattern Tool plate

16 Gb USB stick

USB software license dongle

4-port USB hub

Calibration board

Colored background for object teaching

Hardware kit to mount the Wrist Camera to Universal Robots.

Wrist Camera Tags for Visual Offset (5)

Wrist Camera -Instruction Manual

Summary of Contents for RWC-CAM-001







































































































































Search results

Summary of Contents for RWC-CAM-001

Reviews:

Brands by name

Popular brands

ROBOTIQ RWC-CAM-001, Instruction Manual

Search results

Summary of Contents for RWC-CAM-001

Reviews:

Brands by name

Popular brands