ROBOTIQ CNC Machine Tending Kit, Instruction Manual

Page: 58 / 144

Robotiq CN C M achine Tending Kit Instruction M anual
5.3.1. Adding a Multipoint Path Node
1. On the Teach Pendant, tap New to create a program or Open to load a program.
2. From the left navigation pane, tap URCaps > Mult ipoint Pat h.
3. Tap the Mult ipoint Pat h node in the Robot Program to edit it.
Fig. 5-7: Multipoint Path node (empty).
Fig. 5-8: A Multipoint Path parent node is always followed by a MoveJ command leading to the initial waypoint of the path sequence.
58