025
2Q2ࢆ
Press and hold the button to turn on the robot. The power in-
dicator will turn on, and the robot will enter standby mode. Press
and hold the
EXWWRQWRWXUQRࢆWKHURERWDQGHQGWKHFXUUHQW
cleaning cycle.
Note:
7KHURERWFDQQRWEHWXUQHGRࢆZKHQLWLVFKDUJLQJ
Note:
Ŏ
Cleaning cannot start if the battery level is too low. Allow the robot to charge before start-
ing cleanup.
Ŏ
Before cleaning, tidy cables (including the charging dock power cable) and fragile items
IURPWKHࢊRRU/RRVHZLUHVDQGREMHFWVPD\JHWFDXJKWLQWKHURERWUHVXOWLQJLQGLVFRQQHF
-
tion or damage to wires and property.
Ŏ
If cleaning is completed within 10 minutes, the area will be cleaned twice.
Ŏ
If the battery runs low during the clean, the robot will automatically return to the charging
GRFNWRWRSXSDQGFRQWLQXHZKHUHLWOHIWRࢆ
Ŏ
If the VibraRise mop cloth mount is attached, the robot will lift the mount to clean carpeted
areas.
Zone 1 – Cleaned
Zone 4 – Next Zone
Zone 2 – Cleaned
Zone 3 – In Progress
Start Cleaning
Press the button to start cleaning. The robot will plan its route
based on its scan of the room. It then splits each room into
VTXDUHVFOHDQLQJWKHHGJHVRIWKHVTXDUHࢉUVWEHIRUHFRYHULQJWKH
LQVLGHLQD]LJ]DJSDWWHUQ$IWHUZDUGLWPRYHVWRWKHQH[WVTXDUH
XQWLOHYHU\]RQHLQHYHU\URRPKDVEHHQHࢇFLHQWO\FRYHUHG
Mode Setting
8VHWKHDSSWRDGMXVWVXFWLRQSRZHUDQGYLEUDWLRQVWUHQJWK
Instructions