Robopac Compacta S4, Use And Maintenance Manual

Page: 87 / 115

87
INFORMATION ABOUT THE USE ENG
6.4. SETTING MODIFICATION MODE
- Texts and values editing.
- Progressive adjustment of values.
Important
The performed modifications are applied immediately and are stored automatically.
6.4.1. TEXTS AND VALUES EDITING
The keypad is displayed each time the editable or
programmable functions are enabled.
Type the requested value or name and confirm by
pressing “ENTER” ( 1).
Touch the “ESC” ( 2) key to disable the editing mode.
1. Key to confirm and save the text or value entered.
2. “Esc” button to disable the editing mode and to close
the page.
3. Display showing the values and texts edited.
4. Button to delete the text or value selected.
5. Button to delete one character at a time (starting
from right).
6.4.2. PROGRESSIVE ADJUSTMENT OF VALUES
The page is displayed each time the editable or
programmable functions are enabled.
A) Display showing the figure to be set.
B) “Esc” button for closing the page.
C) Buttons to increase or decrease the value,
displayed in the (D) area.
D) Displays the value typed with buttons (C) and
cursor (E).
E) The graphic bar represents the set value in relation
to the allowed values.