tm2627 Jan-20
8
2. Intended use
2.1. Raw material requirements
Use only 100% pure sugar (beet or cane) with flossine or ready to use
flossugar. Do not use sugars with starch, dextrose or similar additives as they
can result in poor quality floss and/or clog the heater coil assembly.
2.2. Getting started
Unpack machine and save materials for future shipping needs.
Place the machine on a stable table or cart.
Before attaching power cord, fully raise all four transportation fastening nuts
(16) until they reach the rubber floss pan supports.
Transportation position
Operation position
TURNING ON THE MACHINE WITHOUT RAISING FASTENING NUTS WILL RESULT IN MACHINE
FAILURE!
Wash silicone ring and silicone collar with dish soap. Carefully install silicone
ring on the stator. Adjust the exposed gap on the stator intake to regulate
airflow depending on ambient conditions.
For indoor operation (70° F and 50% RH) minimize airflow by exposing no more
tha
n ½ inch of the intake grill
Next, remove the thin protective film from the Floss Pan and wash with dish
soap. Place the pan on the machine making sure the indentations rest on the
four rubber support legs.
