4 www.robofiber.com
LFC series
Gigabit Fiber Media Converters
Technical Specifications
Standards
IEEE 802.3, 802.3u, 802.3z, 802.3ab
Connectors
SFP slot, RJ45 UTP port, DC power plug
UTP port
RJ45, Auto MDI/MDI-X, full duplex, 10M,
100M or 1000M modes
SFP slot
Supports 100M or 1000M speed SFPs (up to
2.5G for LFC-1000-SS)
Power Adapter
Adapter with AC 100-240V input, 0.5A
AC frequency: 50-60Hz, Output DC 5V/1A
Power Requirements
DC 5-12V, 4W max. power consumption
Dimensions
90mm x 60mm x 20mm (SFP not included)
Mounting
Wall or shelf (optional bracket needed)
Environmental Conditions
Operating Ambient Temperature: 0 to 50
℃
Operating Humidity: Maximum 85%, Non-
condensing
Storage Temperature: -30 to 70
℃
Storage Humidity: Maximum 95%, Non-
condensing
Indoor rated operating device
MTBF
65,000 hours
Warning
1.
Use only indoors in climate-controlled environment.
2.
Avoid looking directly into fibers or lasers while unit is powered.
3.
Use only the AC adapter included with the unit (or with the LFC series
chassis available separately)
FCC and CE markings
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
This is a CE class B device, intended to be used in residential, commercial or
industrial applications.
Fiber Media Converters
Gigabit Ethernet and multi-rate LFC series
LFC-1001-SFP
LFC-1002-SFP
LFC-1000-SS
User
’s
Manual
