GoBoard B2 User Manual
www.roboconn.org
Contains confidential and proprietary information which may not be copied, disclosed or
used by others except as expressly authorized in writing by ROBOCONN.
17
6.4
App Settings Page
Figure 10
– App Settings Page
On the setting page, you can do settings for balance control and remote control. Also you can view device information,
upgrade firmware, change Bluetooth name, control head light, lock/unlock the device and remotely switch off the
device. All the settings are saved in the memory.
6.5
App Balance Control Page
Figure 11
– App Balance Control Page
If the remote is not connected to the skateboard and the skateboard supports balance control, this page can be used for
balance control settings like sensor calibration, mode control, and maximum speed control and get on braking. Each
setting we do is replied and confirmed by a short buzzer sound from the skateboard.
6.5.1
Get on Braking Tab
When ‘Get on braking’ is enabled, the device wheels will be locked gently to assist the user getting on the device. Once
the rider has got on, the wheel braking disappears. If this is not enabled, the wheels will be free while getting on the
device. In beginner balance control mode, this tab is automatically switch on.
