ROBO Cylinder IAI America RCA-SA4C, Operating Manual

Page: 38 / 128

27
4. Operating and Storage/Preservation Environment
4.1 Onst allation Environment
The actuator should be set up in an environment, which meets the following criteria:

Avoid direct sunlight.

Avoid radiant heat from strong heat sources such as a furnace.

Ambient temperature should be 0 ~ 40

C.

The humidity should be less than 85% and there should be no condensation.

Avoid exposure to corrosive or combustible gases.

The area should have very little dust and be suitable for normal assembly operations.

Avoid exposure to oil mist or fluids used in cutting.

Not subject to impact or vibration.

Avoid extreme electromagnetic waves, ultraviolet rays and radiation.

This product is not intended to be used in a chemical environment.
In general, the environment should be one in which an operator can work without protective gear.
Work space needed for maintenance/inspection
[Motor straight type]
[Motor reversing type]
4.2 S torage/Preservation Environment
The storage/preservation environment should be similar to the operating environment. In addition, you must take
precautions against condensation if the unit is to be stored/preserved for a long period of time. Unless there are
special instructions, we do not include moisture absorption agents when shipping the unit. If you are
storing/preserving the unit where condensation might occur, then you must treat the entire package or treat the
unit itself after it is unpacked to prevent condensation. The unit can withstand up to 60

C during a short
storage/preservation interval but only up to 50

C if the storage/preservation period is longer than one month.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com