Robland M500 EL, Manual

Page: 5 / 20

5
- contact with the saw blade during the stop time of the saw blade (10 sec). - recoil of the
workpiece or recoil of parts within the workpiece - tilting of the workpiece due to insufficient
support.
- Injuries due to tool breakage or parts that break off the tool.
- Injuries in the non-secured area between the machine table and the saw blade during sawing
parts.
- Risk of pinching and crushing between the parallel fence and the sliding table
- Risk of pinching and crushing between the parallel fence and the saw blade, riving knife and saw
blade.
- When moving the sliding table, there are risks for clamping, pinching and crushing. Only use the
handle to move the sliding table.
- When cutting plastics, there is a risk of the release of harmful substances.
- Risks due to changes made to the machine by unauthorized personnel.
- Risks for the machine, tools and safety equipment when tilting the blade while the saw blade is
rotating.
- Risks for the machine, tools and safety equipment when setting the parallel fence with rotating
saw blade.
SOUND REDUCTION
- The type and condition of the saw blade is important to keep the noise level as low as possible.
- The material and the position of the safety devices are important for reducing the noise level.
Using the correct speed of the saw blade for the type of material will reduce the noise level.
- The above does not mean that no additional protection measures such as hearing protection
should be used.
Explanation of acoustic levels
The values given are the emission values and not necessarily the safe working levels.
Although there is a relationship between the emission values and the level of exposure, this can not
be reliably used to determine whether additional measures need to be taken.
Measurements according: NBN EN ISO 3746 (2011)
NBN EN ISO 11202 (2010)
Measurements performed by: Vinçotte nv
A measurement uncertainty tolerance of K = 4 dB (A) applies to the indicated emission values.
Workstation
Level acoustic load
dB (A)
Level acoustic power
dB (A)
Sawing 92.1 100.1