www.roblan.com
MANUAL DE INSTALACIÓN
| INSTALLATION MANUAL
ROBLAN EUROPA S.A.
Avda. de las Retamas 5. 45950
Casarrubios del Monte
Toledo, Spain
ROBLAN COLOMBIA S.A.S.
NIT. 900.748.926-0
ROBLAN AUSTRAL SPA
ROBLAN UK LTD
This
227CBUCOPD17MOLF
Lighting
Control has an IP66 rated
weatherproof enclosure and can be
surface mounted onto an external/
internal ceiling or wall. Confi gurable
via the free to download Casambi
APP on Google Play or Apple APP
Store.
INSTALLATION
To be installed by a competent person with
reference to BS 7671 or equivalent local standards.
If in doubt consult a qualifi ed electrician.
• Plan where the
227CBUCOPD17MOLF
is to be located
(see diagrams 1 and 2). Switch off supply and
check for hidden cables and pipes.
• The detector should be sited so that it is not
shaded from daylight.
• Make sure the power is isolated from the circuit.
• Remove the front cover by by removing the two
screws on the front face of the product.
• The detector could be ceiling mounted up to
17 metres high, via any of the four pre-drilled
mounting holes only and must be mounted with
the cable entering from below.
• Thread mains cable carefully through the entry
point.
• The
227CBUCOPD17MOLF
should be connected as
shown in diagram 3:
L - Live in. N - Neutral in.
• Replace the front cover ensuring the two screws
are secured.
OPERATION
To check the operation of the
227CBUCOPD17MOLF
:
• Turn on the supply then after 20 seconds if the
sensor has recognised movement of a person
within its zone of detection.
The control also features adjustable time out (time
lag) control and daylight threshold control which
are confi gured by the Casambi APP.
PRECAUTIONS
• Do not place the
227CBUCOPD17MOLF
near heat
sources, fans or in ventilated ceiling voids.
• Do not place close to, or positioned such
that, any light source points directly into the
227CBUCOPD17MOLF
.
• Ensure wires and cables are securely held within
the connection terminals.
• The
227CBUCOPD17MOLF
should be protected by
a 5 or 6 Ampere mcb or fuse.
•
Disconnect the 227CBUCOPD17MOLF from the
circuit before performing insulation testing
of the wiring circuit.
TECHNICAL DETAILS
INPUT
Voltage:
220 - 240Vac
Frequency:
50Hz
Max. mains current:
20mA
Standby current:
16mA
RADIO TRANSCEIVER
Operating frequencies: 2.4... 2,483 GHz
Max. output power:
+4 dBm
LUX PARAMETERS
Range:
5 - 2000 lux
OPERATING CONDITIONS
Note: The temperature difference between the
detection target and the background must be
at least 4 °C.
Ambient temperature:
-20... +40 °C (lout
0.05 A)
Storage temperature:
-25... +75 °C
Max. relative humidity:
0... 80%, non cond.
CONNECTORS
Terminal block
Wire size:
0.5mm
2
- 2.5mm
2
solid or stranded
Wire strip length:
6-7mm
Tightening torque:
0,4 Nm/4 Kgf.cm
MECHANICAL DATA
Dimensions:
75mm x 60mm x
37mm
Weight:
100g (unpacked)
Degree of protection:
IP66
Protection class:
Built-in Class 2
Material (casing)
Flame-retardant
polycarbonate/
Polypropylene.
Finish / Colour
Opaque /White (RAL
9003)
Protection class:
Built-in Class 2
CONFORMITY AND STANDARDS
EMC emission:
EN60669-2-1:2004
inc. A12:2010
EMC immunity:
EN60669-2-1:2004
inc. A12:2010
Safety:
EN60669-2-1:2004
inc. A12:2010
Environment:
Complies with WEEE
and RoHS directives
5 YEAR WARRANTY
227CBUCOPD17MOLF
comes with a 5 year warranty
from the date of manufacture and is CE marked.
N
L
230Vac
5A or 6A MCB
or fuse
L - Live in. N - Neutral in.
N
L
DIAGRAM 2
Suggested typical wiring
DIAGRAM 3 - DIMENSIONS IN MM
10
65
37
24
60
fron
s
t
ide
20mm threaded
entry spout
inside
4 x mounting
holes. 3M screws
recommended
(not supplied)
17
48
up to 20m
up to 24m
Strong detection zone
i.e. person moving arm
or walking towards PIR
For optimum coverage recommended
mounting height: 17m
Secondary detection
zone i.e. person walking
perpendicular to PIR
DIAGRAM 1 - CEILING MOUNTED DETECTION
DIAGRAM 2 - WALL MOUNTED DETECTION
Strong detection
zone (up to 10m)
Recommended
wall mounting
height 1 to 2.2
metres
227CBUCOPD17MOLF
IP66 Rated Compact Passive Infra Red (PIR)
Occupancy/Person Detector & Photocell
Input: 220-240 Vac 50Hz
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING THE PRODUCT
NOTE:
227CBUCOPD17MOLF
is only compatible to work with CASAMBI enabled equipment
