12
Operating Instructions
Alarm Clock Setting Function
In the state of function to be selected, when the display shows the system time, oven in use symbol“
” and
decimal point symbol “
” keep bright, press “
” twice, then the clock icon“
”twinkles, and the screen
display changes to the alarm clock time(First set default display “0·00”), alarm clock time and decimal point
symbol “
” always display , like pic 9.When the alarm clock icon“
” twinkles, Press“
”or“
” to set the
clock. Alarm clock well set diagram like pic 10 (Set 10 minutes).
Pic 9: Alarm clock setting initial state Pic 10: Alarm clock well set
(alarm clock icon flickering) (alarm clock icon flickering)
After choosing the time , lift the finger off the buttons and wait for 5 seconds, then the alarm clock icon“
”
stops twinkling and changes to always bright, display screen shows system time, oven in use
symbol“
” ,decimal point symbol “
” and system time keep bright. It means time is well set. See Pic 11.
Whenever user wants to adjust the clock, in the working status, push “
” twice, when user sees the alarm
clock icon“
” twinkles, it will shows the set clock or the time left, and user can adjust the clock again. After
setting is done, the display will change back to system time.
Pic 11: Alarm clock working status diagram Pic 12: Alarm clock time over diagram
(alarm clock icon always bright) (alarm clock icon flickering)
For example, set the clock 10 minutes. After10 minutes, display screen shows system time, oven in use
symbol“
” ,decimal point symbol “
” and system time keep bright, the alarm clock icon “
” twinkles,
buzzer will prompt the user for 5 minutes, reminding the user that the alarm clock time is over .Like Pic
12.Pressing any key can stop the buzzer and extinguish alarm icon “
”.Like Pic 13.
Pic13: Cancel alarm clock icon display diagram(After alarm clock over)
Note
：
Alarm clock time setting range is 0
：
00-23
：
59.