Installation instruction
How to Drain Excess Water From Hoses
If the sink is more than 1000mm higher than the floor, the excess water in hoses cannot be drained directly into the
sink. It will be necessary to drain excess water from hoses into a bowl or suitable
container that is held outside and lower than the sink.
Water Outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure
that the water drain hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 metres, otherwise the cleaning effect of the dishwasher could be reduced.
Syphon Connection
The waste connection must be at a height less than 1000 mm (maximum) from the bottom of the dish.
The water drain hose should be fixed .
Start of
Dishwasher
The following things should be checked before starting the dishwasher.
1
The dishwasher is level and fixed properly.
2
The inlet valve is open.
3
There is a leakage at the connections of the conducts.
4
The wires are tightly connected.
5
The power is switched on.
6
The inlet and drain hoses are knotted.
7
All packing and print materials should be taken out of the dishwasher.
Attention:
After installation, please make sure to keep this manual.
The content of this manual is very helpful to the users.
18
