If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Line out socket (3.5mm Jack)
A 3.5mm
Line Out
socket
located on the rear of your clock radio is provided
for connecting the audio signal to an external amplifi er. Inserting an audio
cable into this socket will not mute the internal loudspeaker. Set the volume
control on the clock radio to minimum if desired.
52
Display and Audio
2,3
2,3
1-3
Headphone socket
1. A
3.5mm
Headphone Socket
located on the rear of your clock radio
is provided for use with headphones. Inserting a plug automatically
mutes the internal loudspeaker.
IMPORTANT:
Excessive sound pressure from earphones and headphones
can cause hearing loss.
Your clock radio is supplied set up for best audio quality from the built
in loudspeaker. If you wish to use headphones you may set the audio
settings so as to give best quality when listening via headphones.
1. When the radio is playing press and hold the
Select/Tone
button 'Off'
will show on the display. The clock radio will select the Audio menu
which allows bass and treble adjustment as well as alternative access
to the main Mode menu.
2. To adjust the headphone audio setting, press the
Tuning Up
or
Down
buttons until 'Headphone EQ' is displayed. Press and release the
Select
button. The display will show the current Headphone EQ setting.
3. Press
the
Tuning Up
or
Down
buttons to set the headphone EQ to
On or to Off. Press the
Select
button to confi rm selection.
