Roberts Stream 67 Instruction Manual Download | Manualshive

Page: 87 / 92

background image

86

Information .

Audio codecs

Your audio system supports a range of audio codecs which provide compatibility with a wide range of Internet Radio stations. These also allow users

to stream music from their computers or to play directly from USB flash memory devices.
Note that for any given audio codec, there are many streaming protocols available, and thus even if an Internet Radio station uses a supported format,

this does not guarantee that every such station will work with your audio system. The radio stations database to which your audio system connects is

checked for compatibility so that most stations should be playable without problems. Similarly when streaming media from a computer, while a codec

may be supported, there can be many subtle variations in formats, tagging schemes and protocols (even within UPnP). In general your audio system

will play the supported formats with most common UPnP servers.
The following table summarises the maximum supported bit-rates for the various audio formats that are playable on your audio system. Higher rates

may be playable in some cases but performance of the product may be affected.

Codec

Maximum supported data rate

AAC (LC, HE, HE V2)

320 kbits/sec

ALAC

(1)

1.5 Mbits/sec

FLAC

(2)

1.5 Mbits/sec

LPCM

(3)

1.536 Mbits/sec

MP3

320 kbits/sec

WAV

(3)

1.536 Mbits/sec

WMA

(4)

320 kbits/sec

All codecs support 2-channel (stereo) coded files only.
All codecs support sample rates up to 48 k samples/sec (includes 32 k and 44.1 k samples/sec).
Files which have Digital Rights Management (DRM) protection applied will not be playable on your audio system.
(1) 16 bit samples are supported in ALAC files.
(2) 16 and 24 bit samples are supported in FLAC files.
(3) The maximum supported bit-rate is for 48 kHz sampling, 2 channels and 16-bits per sample.
(4) WMA Lossless, WMA Voice, WMA 10 Professional, and files which have DRM protection are not supported.
(5) When using your audio system as part of a group of multi-room products, audio files in ALAC and FLAC formats will only play on the

group master

«
...
85
86
87
88
89
...
»

Summary of Contents for Stream 67





























































































Reviews:

No comments

Related manuals for Stream 67

Concord express

Brand: GE Pages: 3

Concord express

Brand: GE Pages: 32

CQ-C7413U? CQ-C7113U

Brand: Panasonic Pages: 22

CN-NVD905U - Strada - Navigation System

Brand: Panasonic Pages: 16

CN-NVD905U - Strada - Navigation System

Brand: Panasonic Pages: 16

CN-NVD905U - Strada - Navigation System

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 41

Brand: 2easy Pages: 12

Brand: 2easy Pages: 30

Brand: FAAC Pages: 36

Brand: Harman Kardon Pages: 11

Brand: Harman Kardon Pages: 8

Brand: Harman Kardon Pages: 9

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 18

Brand: Harman Kardon Pages: 2

MaestroKitchen 100

Brand: Harman Kardon Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands