background image

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

18

1

1

2

3

Alarm sound level control

1.

The alarm sound level on both radio and buzzer alarms can be
adjusted using the 

Alarm sound level control

 located on the

underside of your clock radio.

1

Nap timer

1.

The Nap timer is a short term alarm which can be set for a delay of
10-120 minutes in 10 minute steps. Press and release the 

Nap

button

 until the required Nap time is shown on the display. The

buzzer alarm will sound after the Nap time has elapsed.

2.

Press the

 On/Off button

 to silence the Nap buzzer alarm

3.

The Nap timer can be cancelled before the Nap time has elapsed by
pressing and releasing the 

Nap button

 until the word OFF appears

in the display.

1

2

3

Cancelling alarms

1.

Press the 

Alarm 1 or Alarm 2 buttons

 (depending on which alarm

you wish to cancel).

2.

Press the 

Set button 

the alarm symbols will flash in the display.

3.

Repeatedly press and release 

Mode button

 until only the 

 or 

symbols appear in the display.

4.

Press the 

Alarm 1 or Alarm 2  button

 to confirm cancellation of

alarms. Alarm symbols

 or 

 will disappear from the display after

3 seconds indicating alarms have been cancelled.

4

4

Summary of Contents for CR2003

























Reviews: