2
3
4
Bluetooth adaptor illustration
Safety Precautions
• The Bluetooth adaptor is designed only for use with the Roberts Stream 93i
radio.
• There are no user serviceable parts inside this product.
• Do not attempt to open or disassemble any part of the product.
• Do not dispose of the product in a
fi
re or incinerator.
• Do not leave or expose the product to a heat source such as in a car under
direct sunlight.
• Do not expose the product to moisture.
• Do not allow the product to be exposed to water, steam or sand.
• The product shall not be exposed to dripping or splashing and no objects
fi
lled with liquids, such as vases, shall be placed on the product.
• Operate the product such that there is a minimum distance (10cm
recommended) to adjacent objects in order to ensure good ventilation. The
ventilation of the product should not be restricted by covering it with items
such as newspapers, tablecloths, curtains etc.
• No naked
fl
ame sources such as lighted candles should be placed on the
product.
• Avoid using or storing the product at extremes of temperature. Avoid leaving
the unit in cars, on window sills, in direct sunlight etc.
• Be sure to read additional safety instructions in the user guide for the
Stream 93i.
Bluetooth adaptor installation
‘Bluetooth pairing’ occurs when two Bluetooth enabled devices agree to establish
a connection and communicate with each other.
When a Bluetooth enabled device is in a ‘discoverable’ state other Bluetooth
devices can detect, pair with or connect to it.
Your Bluetooth adaptor will
fl
ash its Bluetooth indicator light when it is discoverable
or when it is trying to connect to a previously paired Bluetooth device. When
a device is paired with and connects to your adaptor, the Bluetooth indicator
light will remain lit.
1. Ensure that the Stream 93i radio is either in standby or disconnected from
the mains adaptor.
2. Remove any audio cable from the Auxiliary Input socket and any USB
memory device from the USB socket.
3. Carefully align the
USB connector
and
Auxiliary input connector
on the
Bluetooth adaptor with the USB socket and Auxiliary Input socket on the
back of your radio.
4. Push the adaptor towards the back of the radio so that both connections
are made at the same time, keeping the adaptor as straight as possible.
5. Ensure that the Bluetooth adaptor is
fi
tted snuggly to the rear casing of the
radio as in the illustration on the
fi
rst page.
Operating your Bluetooth adaptor
1. Ensure that the Bluetooth capability on your phone, tablet or PC is enabled.
You may need to refer to the user documentation for your device, since the
method will vary with each device.
2. Switch your Stream 93i on and select the
Auxiliary input
mode (please refer
to the user guide provided with your Stream 93i).
3. Press and release the
On/Standby/Pair
button on your Bluetooth adaptor. Your
adaptor will show that it is ‘discoverable’ by
fl
ashing the
Bluetooth indicator
.
USB socket
Auxiliary input
socket
Bluetooth indicator
About your Bluetooth adaptor
The Bluetooth adaptor allows you to play audio, play sound from video
fi
les
and stream music from Bluetooth capable devices such as your moblie phone,
computer, tablet etc. through your Stream 93i loudspeakers. A Bluetooth
connection can provide a link for audio up to a distance of approximately ten metres.
Bluetooth On/Standby/Pair button
Bluetooth adaptor USB connector
Auxiliary input
connector
Please continue overleaf.
ROBERTS
Please read this manual before use
Bluetooth Adaptor
Accessory for the Stream 93i