3
© 2018 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Part no. 209-1291_rA
rev. 05/15/18
Profiles
™
Wall Mirror
1. Carefully select the wall mirror location and mark the bottom and center line of the wall mirror on the wall with a pencil.
2. Determine the placement of the two supplied mounting brackets [210-1484] and lower mounting blocks (Fig 2).
3. Install the two mounting brackets and lower mounting blocks in the locations determined using the supplied washers
[SS164] and #10 screws [SS674] as shown (Fig 3).
Note!
You must use the supplied wall anchors [203-1349] when there is no wall framing at the mounting locations.
A. Drill a 5/16" hole into drywall/wallboard, tile, plaster, brick, or concrete.
B. Insert the wall anchor into the hole. Tap until anchor flange is flush with the wall.
C. Insert a #10 screw and tighten until contact with mounting bracket or lower mounting block is achieved.
D. Continue to tighten screw until there is a strong resistance. DO NOT OVER TIGHTEN.
INSTALLING THE MIRROR
WALL ANCHOR INSTRUCTIONS FOR HOLLOW WALLS
CL
H
W¹
3"
W²
CL
MODEL
W¹
W²
H
PM2430TXX
16 - 17-1/2"
17-1/2"
26-7/8"
PM2440TXX
16 - 17-1/2"
17-1/2"
36-1/4"
PM3030TXX
22-1/2 - 24"
24"
26-7/8"
PM3040TXX
22-1/2 - 24"
24"
36-1/4"
PM3630TXX
28-1/2 - 30"
30"
26-7/8"
PM3640XX
28-1/2 - 30"
30"
36-1/4"
H
W¹
3"
W²
CL
MODEL
W¹
W²
H
PM2430TXX
16 - 17-1/2"
17-1/2"
26-7/8"
PM2440TXX
16 - 17-1/2"
17-1/2"
36-1/4"
PM3030TXX
22-1/2 - 24"
24"
26-7/8"
PM3040TXX
22-1/2 - 24"
24"
36-1/4"
PM3630TXX
28-1/2 - 30"
30"
26-7/8"
PM3640XX
28-1/2 - 30"
30"
36-1/4"
Model
W
H
26-7/8"
17-1/2"
36-1/4"
17-1/2"
26-7/8"
24"
36-1/4"
24"
26-7/8"
30"
36-1/4"
30"
PM2430TXX
PM2440TXX
PM3030TXX
PM3040TXX
PM3640TXX
PM3640TXX
3"
W
W
H
2
3
A
B
C
D
